$1000 OFF
6000 Series 60″ 37 hp
STORE PICKUP OR LOCAL DELIVERY ONLY
SET UP AND PREP FEES MAY APPLY
The Z Master 6000 Series is one of Toro’s most advanced zero-turning radius mowers. It’s also one of our most comfortable. This Z Master® 6000 Series mower has a 37 HP Vanguard 993cc Engine with 60 in. (152 cm) TURBO FORCE® deck.
- Our TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well
- Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue, fully adjustable to match operator comfort
- Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
- 37 HP* Vanguard EFI 993cc Engine with Oil Guard
- Oil Guard delivers 500 hour oil maintenance intervals, utilizing a dry sump system and large external oil reservoir, reducing maintenance downtime.
Specifications
| Adj Discharge Baffle | Standard, Tools-Free |
|---|---|
| Air Filter | Heavy-Duty Canister Air Cleaner |
| Blade Design | 0.25 in. / 0.635 cm thick heat-treated steel |
| Blade Tip Speed | 18,500 ft/min / 5,638 m/min |
| Caster Tires | 13 in. x 6.5 in. – 6 in. Flat-Free Semi-Pneumatic |
| Clutch | Electromagnetic |
| Comfort Platform | Deluxe Suspension with 3-D Isolation Mounts |
| Cutting Width | 60″ |
| Deck Design | 80-Grade 7-gauge 60″ TURBO FORCE® w/bull-nose bumper |
| Discharge Chute | Rubber |
| Drive Tires | 24 in. x 12 in. – 12 in. |
| Engine | 37 hp* Vanguard EFI 993 cc |
| Engine Brand | Vanguard |
| Engine Displacement | 993 cc |
| Engine Horsepower | 37 hp |
| F Ground Speed | Up to 12.0 mph |
| Fuel Capacity | 12 gal. / 48 Qt. |
| Fuel Type | Gasoline |
| Height of Cut | 1.0 – 5.5 in. |
| Hour Meter | Standard Hour Meter |
| Hydraulic Fluid | Premium synthetic |
| Product Type | Zero Turn Mowers |
| Roll-Over Protection | Folding; Standard |
| Seat | Handcrafted Deluxe Suspension Seat with Arm Rests Featuring Bullhorn Accent |
| Spindle Bearings | Greaseless Ball Bearings |
| Spindle Housing | 9 in Diameter Cast Aluminum |
| Start Type | Electric |
| Steering Controls | 1-5/8″ Diameter Grips; Adjustable, Dampened |
Disclaimer
*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
Features Exclusive TURBO FORCE DeckHigh-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
 7-Gauge, High-Strength SteelThe TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
 Deluxe Handcrafted Seat with Arm RestsUltimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
 A Flat Crisp Cut with Precision Blades(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
|
 Rubber Discharge ChuteHigh performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
 Smarter design in a bull-nose bumper7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4″ (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and fall clean-up also is significantly reduced.
 Patented Adjustable BaffleAllows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
 Smooth, Powerful ResponseThe new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.
|
 Operator Information CenterThe instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
 Folding Rollover Protection System ROPSA Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
 Cast Aluminum SpindleCools quickly for enhanced durability and performance.
 Horizon360® Business Management Software.Managing and growing your business is hard work. Using a business management software system shouldn’t make it harder. That is why we built Horizon360. If you can type and point/click a mouse, you have all the skills required.
|
